Swiss Army Ultrasonic Band Cleaning and Reattachment

Watch Brand: Swiss Army (straight end band)
Tool Used: EuroTool 1.4mm Screwdriver (SCR-911.4)

Step 1

Place the watch case on a cloth and firmly grip the watch with the back of the watch case visible.

Step 2

Step 2: Use the EuroTool flat-nose screwdriver to detach the pin located in the shoulder piece of the watchband (in between the lugs of the watch case). **Repeat steps 1 and 2 for other end of the watch band**

Step 3

Use the EuroTool flat-nose screwdriver to detach the pin located in the shoulder piece of the watchband (in between the lugs of the watch case).

---

Step 4

Remove the band and shoulder pieces from the ultrasonic cleaner. Use water to rinse and brush off the ultrasonic cleaning fluid from the band.

Step 5

Place the spring-bar pin back through the shoulder piece and the band. Then place the spring-bar pin of the watch band into the correct watch lug of the case.

Step 5

Use the EuroTool flat-nose screwdriver to correctly insert the opposite end of the spring into the other lug of the watch case.